Panes · Made to order · Supply only
End-Vent Slider Windows for Toronto projects
Plan your Toronto window order with the correct operation, dimensions and glass for each opening. An end-vent slider combines fixed centre glazing with an operating sash at each end. Specify the section proportions as well as the overall size. Panes supplies the products; your own contractor approves final measurements and completes installation.
See configurations & CAD prices · Design your window
No dealer account needed. Product prices exclude tax and freight. Arrange final measurement and installation with your own contractor.
Compare end-vent slider windows and current CAD prices
Compare complete, made-to-order configurations. The first two examples compare exterior finishes; the third shows another available configuration or fastening choice. Open any example to review its complete specification and customize it.
These examples use double-pane Low-E 180 / clear glass with argon. Confirm the performance and glass requirements for your actual project.
End Vent Slider · 72 × 40 inches
$551.08 CAD
Made to order · Estimated ready date: December 7 – December 14. Freight transit is additional.
- Frame dimensions
- 72 inches wide × 40 inches high
- Window style
- End Vent Slider
- Exterior / interior
- White exterior / white interior
- Glass package
- Double pane · Low-E 180 / clear · argon
- Nailing flange
- Without nailing flange
End Vent Slider · 72 × 40 inches
$630.87 CAD
Made to order · Estimated ready date: December 14 – December 21. Freight transit is additional.
- Frame dimensions
- 72 inches wide × 40 inches high
- Window style
- End Vent Slider
- Exterior / interior
- Black exterior / white interior
- Glass package
- Double pane · Low-E 180 / clear · argon
- Nailing flange
- Without nailing flange
End Vent Slider with Tilt · 72 × 40 inches
$571.54 CAD
Made to order · Estimated ready date: December 7 – December 14. Freight transit is additional.
- Frame dimensions
- 72 inches wide × 40 inches high
- Window style
- End Vent Slider with Tilt
- Exterior / interior
- White exterior / white interior
- Glass package
- Double pane · Low-E 180 / clear · argon
- Nailing flange
- Without nailing flange
Each price is for one complete configured window or assembly with the dimensions and options listed. Images are renders of these configurations. Tax, delivery, measuring and installation are separate. Your contractor confirms the final manufacturing sizes and installation method.
Balance the centre and end sections
A wider fixed centre changes the proportions and leaves different widths for the operating ends. Review the complete elevation and confirm the selected split in the designer before comparing prices.
Check both operating ends
Plan access to the locks, screens and tracks on both sides. Standard sliding and tilt-cleaning variants are separate choices; confirm the actual model and cleaning movement in your order.
Made to order. Production estimates reflect the selected configuration and the factory working calendar. Custom sizes, glass, finishes and special shapes can change the estimate; freight transit is additional.
Confirm delivery access and freight for your Toronto area address before ordering. Coordinate any pickup with the serving location after your order is ready. Arrange measurement and installation with your own contractor.
Plan your Toronto area order
For a Toronto end-vent opening, draw the desired fixed-centre width and the two operating ends rather than supplying only a total width. Check reach to both locks and leave room for the selected cleaning method.
Confirm the measurements for this style
Supply overall frame dimensions plus the centre and end-section widths. Check each operating end’s clear opening separately; the fixed centre does not open.
Prepare your window measurementsReview samples in Etobicoke
The Toronto factory and showroom is at 90 Ronson Dr in Etobicoke. Bring your opening schedule and ask about the specific hardware, glass or finish you want to compare. Check current hours and display availability before travelling.
Choose pickup or address-based delivery
Etobicoke is an active pickup location. Select the pickup site with your order and wait for the ready-for-pickup instructions. For delivery, provide the actual postal code, order and receiving details; a listed project area does not establish a freight rate for every address.
Keep the product order separate from site work
Canadian product examples show CAD prices for their stated configurations. Confirm the final sizes with your own installer, then review current production timing, freight and tax. Panes supplies the products; customers arrange measuring, removal, installation and finishing.
Etobicoke factory and showroom
90 Ronson Dr, Etobicoke, ON M9W 1B6
Call before visiting to confirm the displays you want to compare. Collection is arranged after your order is ready; these configurations are made to order.
905-267-1240 · Showroom hours and directions · Send an opening list or drawings
Views from the Panes configurator
A fixed centre with two opening ends.
The centre section stays fixed while a sash at each end slides horizontally for ventilation. Compare the black exterior and white interior of this three-section configuration. Specify the section widths as well as the overall frame size; the clear opening at either end is smaller than the complete window.
Black exterior
A closed 72 × 40 inch end-vent slider. Two vertical meeting rails divide the fixed centre from the operating end sashes. Confirm the selected section proportions in your configuration.
White interior
The same white interior shows the meeting rails and sash locks. Plan access to both end sashes, screens and tracks for operation and cleaning.
Configurator renderings, not installation photographs. Frame size shown: 72 × 40 inches; no nailing flange. Confirm finishes using physical samples.
Made to order by Panes.
The NFRC directory identifies Panes Window Manufacturing Inc. as the manufacturer. Our published reference tables connect each window family and glass package to its CPD number, so you can compare the window you plan to order.
Define each opening
Record the overall frame dimensions, centre and end-section widths, operating layout, finish, glass and installation flange. Confirm actual clear openings separately from the overall frame size.
Review before production
Match every opening to the approved configuration and itemized price. Confirm the whole-window rating for the selected frame and glass combination.
Plan the arrival
Use the current estimated ready dates for your selected configuration; shape, finish, glass and production-calendar closures can affect timing. Freight transit is additional. All new orders are supply-only; arrange measurement and installation with your own contractor and confirm delivery charges and receiving access for your address.
A documented Panes project
Panes windows in Paton, Iowa
A documented Panes window project on an existing brick building. Dark frames connect the tall ground-floor openings with the smaller windows above.
Project shown for overall design context. Window models, sizes and glass are specified separately for each opening.
View the original Panes project postOrdering questions
How do I compare end-vent slider windows prices in Toronto?
Compare the same frame size, glass, finishes and frame details. The configured examples show a current CAD product price for the stated specification; changing options changes the price. Review quantity, freight and tax before ordering. Installation and on-site measuring are arranged separately with your own contractor.
Can I collect my Toronto window order?
Etobicoke factory and showroom at 90 Ronson Dr, Etobicoke, ON M9W 1B6 is an active pickup location. Choose the pickup site with the order and follow the collection instructions once the products are ready. Made-to-order products are not showroom stock; confirm timing and suitable transport before travelling.
Does the listed frame size establish code compliance?
No. Supply overall frame dimensions plus the centre and end-section widths. Check each operating end’s clear opening separately; the fixed centre does not open. Have your project professional verify applicable performance, safety-glass, escape-opening and property-approval requirements for the actual configuration and address.
Choose a window style
Compare how each style opens, then see configurations, prices and ordering options for your area.
Compare bay and bow windowsFind your local project page
Use your area guide to plan the project. Delivery availability and freight are confirmed for the exact address.